BOB has proved itself a win-win for numerous parents for years. No matter it is a single or double jogging stroller, we have seen them passing through each terrain. Turns out, the wheels and the suspension system of its strollers are spectacular.
Agreed, after a certain period, things need replacement. Bob stroller tire and inner tube replacement, as you are looking out for now. So, today we are about to make your life easier by discussing this topic.
Below we have an in-depth guide. In that, we will discuss the simplest ways you can get this replacement job done. Let’s get straight to that.
Table of Contents
How to Remove Bob Stroller Tire from Frame?
Obvious that you’d need to know how to remove the tire before the inner tube. So, let’s first know that.
Removal of Front Tire
- To remove the front wheel, make sure the seat of the stroller lies against the ground with the front wheel upward
- After that, lock the front swivel of your stroller(if integrated with one)
- Pull out the quick release lever
- Unscrew the adjusting nut from the other side of the wheel
- Move the wheel out
Also Read: Best Bob Stroller for Gravel in 2022
Removal of Rear Tires
- Put your hands on the parking brake and unfasten it
- Move the quick lever up located near the wheel
- Remove the wheel
- In case you are unable to do that, find the secondary retention button
- After finding one, stay pressing it
- Pull the wheel out
How to Remove the Inner Tube/Tire of the Bob Stroller?
Follow the guide steps to takeout the inner tube of the bob stroller:
- Point out the tire valve and open its cap
- Deflate the tire through the exposed part of the valve
- For doing so, use a flat screwdriver
- Press it on the pin on the center of the valve, and it will deflate
- Remember here to keep the cap of the valve safe aside
- Take the flat screwdriver and slid it a bit between the wheel and tire
- Separate the wheel from the tire using a screwdriver gently
- Coordinate with two screwdrivers and insert the second one about 4 inches apart
- Work in a circular motion with these two screwdrivers
- After one complete round, you’d be able to separate tire and wheel with a hand
- Detach both gently without puncturing the inner tube
- Right after that, push out the bob stroller inner tube
- Mind that; you’d have to remove the valve stem along
- Once when you are done with the inner tube, isolate the tire from the wheel
Also Read: 5 Best Stroller for Jogging and Everyday Use
How to Replace the Tire and the Inner Tube of Bob Stroller?
Before replacing the tire with the new tube, check the inside of the tire. It shouldn’t be damaged by any sharp and pointed object. If it’s damaged, you need to buy a BOB stroller inner tube as a replacement.
- Start reinstalling the tire into the wheel
- Keep one edge of the stroller tire over the wheel rim
- Push it gently through the entire wheel, then
- Use a flat screwdriver for help, if required
- Take out the new inner tube
- Using an air pump, inflate it completely
- Once the tube has come into shape, start installing it
- Push it to position in between the wheel and the tire
- Note that the valve of the inner tube and rim hole should align
- Bring upward the valve passing through the hole in the rim
- Fix the tire on the wheel gradually
- Re-inflate the inner tube for long-run
- Forget not to watch out the pressure mentioned on the wheel while inflating (every wheel of the bob stroller require different pressure)
- Cover the valve with the cap you’ve kept safe aside
Also Read: Jogging Stroller Handlebar Extender | 3 Best Options To Opt
How to Install the Bob Stroller Tire Back?
After you are done with all the above procedures, follow this step to re-install your bob stroller tire:
Front Tire
- Position the front wheel in its place
- Align it with the tension adjusting nut
- Tighten the nut moving it in a circular motion
- Meanwhile, keep the quick release lever static
- Once you are halfway done with the nut, keep moving the lever back and forth
- When you feel resistance in moving lever, take it in the upward direction
- Now, pressure the lever with your palm to settle down
- After that, it will pop up with the word close
- Notice that here the lever should be parallel to the fork plate
Also Read: 7 Best Double Jogging Strollers Active Parents Prioritize
Rear Tire
- Push up the stroller little
- Insert the tire straight forward into the stroller frame
- Seal the movement of the tire through the quick release lever
- Worry not; the procedure will be the same for strollers with the secondary retention button
Conclusion
Even though you have accomplished the process mentioned above, cross-check the installation. Move the stroller back and forth. Never make your baby sit in the right after this to avoid any consequences.
Hope this Bob stroller tire and inner tube replacement instruction guide was helpful. And, now you know the correct and easy way to do that.
Also Check: Top 10 Stroller Boards – Safest Yet Kid’s Favorite Ones
